Tool Cleaning

Should a tool,care should be taken to ensure that it is carefully performed to increase effectiveness and prevent damage to the product. This guidance is provided to assist in the safe cleaning of a product.

When cleaning a product, there are a few important things to remember:
Always unplug any devices and remove batteries prior to cleaning.
There are different recommendations for batteries compared to tools and chargers. Be sure to follow the correct advice for the product you are cleaning.

For tools and chargers only, it can first be cleaned in accordance with the cleaning instructions provided in the operator's manual and then cleaned with a cloth or sponge dampened with a diluted bleach solution*and allowed to air dry. This method is consistent with CDC advice. It is important to adhere to the warnings below:
Do not use bleach to clean batteries.

Observe the necessary precautions when cleaning with bleach.
Do not use the tool or charger if you detect degradation of the housing, cord or other plastic or rubber parts of the tool or charger after cleaning with the diluted bleach solution.
The diluted bleach solution should never be mixed with ammonia or any other cleanser.
When cleaning, dampen a clean cloth or sponge with the cleaning material and ensure the cloth or sponge is not dripping wet.
Gently wipe each handle, grasping surface, or outer surface with the cloth or sponge, using care to ensure liquids do not flow into the product.
Electrical terminals of products and the prongs and connectors of power cords or other cables must be avoided. When wiping batteries, be sure to avoid the terminal area where contact is made between the battery and the product.
Allow the product to air dry completely before reapplying power or reattaching the battery.
People cleaning products should avoid touching their face with unwashed hands and immediately wash their hands or use a proper hand sanitizer before and after cleaning to help prevent contamination.
*A properly diluted bleach solution can be made by mixing:

5 tablespoons (1/3rd cup) bleach per gallon of water; or
4 teaspoons bleach per quart of water
Please note: This guidance does not apply for cleaning products where there is a risk of other health hazards, such as blood, other blood borne pathogens or asbestos.

This document is provided by Hantechn for informational purposes only. Any inaccuracies or omissions are not the responsibility of Hantechn.

Hantechn makes no representations or warranties of any kind regarding this document or its contents. Hantechn hereby disclaims all warranties of any nature, express, implied or otherwise, or arising out of trade or custom, including, but not limited to, any implied warranties of merchantability, non-infringement, quality, title, fitness for a particular purpose, completeness or accuracy. to the fullest extent permitted by applicable law, hantechn shall not be liable for any loss, expense or damage of any nature whatsoever, including, but not limited to, special, incidental, punitive, direct, indirect or consequential damages, or loss of revenues or profits, arising out of or resulting from the use of this document by a company or person, whether in tort, contract, statute or otherwise, even if hantechn has been advised of the possibility of such damages. Hantechn has been advised of the possibility of such damages.